PRO Series
Scalable Community or Comercial
RO Systems
Water Store RO Skids
Three RO system skids 2600, 5200 or
7800 US gallons per day
7800 US gallons per day
PRO 2600
PRO 5200
PRO 7800
Pro Series
Water Store Skid
2600/5200/7800
The Integrity Pro Series 2600/5200/7800
Water Store Skid System is a state of the art
water treatment system designed for today’s
busy water store.
Polished stainless steel tank jackets and control panel for that
professional, clean appearance. The system makes excellent
water virtually anywhere, in fact it shuts down automatically if
the water goes “out of spec”. Easy to install! The feed water,
drain, storage and point of use connections can be connected
on either side of the system. It will operate up to six fill spouts
and a window vendor at once. The system is upgradeable, you
can convert a 2600 to a 5200 or a 5200 to a 7800 with a
simple plug and play optional membrane and housing. All
mounting holes are pre-drilled. The whole upgrade takes less
than one hour
to perform.
Water Store Skid
2600/5200/7800
The Integrity Pro Series 2600/5200/7800
Water Store Skid System is a state of the art
water treatment system designed for today’s
busy water store.
- • 2600, 5200 or 7800 GPD rated capacity.
• Stainless steel high pressure pump and membrane
vessels.
• Full microprocessor control package including TDS
monitor and alarm, auto flush system, elapsed hour meter
and much more.
• RO monitoring package w/ flow meters, filter gauges, etc.
• Dual Alternating Autotrol Ready Soft water softener.
• 2.0 cubic foot GAC filter w/ pre-treat lockout.
• Dual 20” Big White Prefilters.
• Dual 20” Big White Post Filters.
• GrundfosMQ re-pressurization system. Water cooled motor,
stainless steel pump end, run dry protection.
• 28 GPM Trojan UV Max.
• Heavy duty, powder coated steel frame with casters for
ease of
movement.
• Pre-plumbed with schedule 80 PVC and tested prior to
shipping.
Polished stainless steel tank jackets and control panel for that
professional, clean appearance. The system makes excellent
water virtually anywhere, in fact it shuts down automatically if
the water goes “out of spec”. Easy to install! The feed water,
drain, storage and point of use connections can be connected
on either side of the system. It will operate up to six fill spouts
and a window vendor at once. The system is upgradeable, you
can convert a 2600 to a 5200 or a 5200 to a 7800 with a
simple plug and play optional membrane and housing. All
mounting holes are pre-drilled. The whole upgrade takes less
than one hour
to perform.
| Download the brochure and specifications |
Water Store Skids Product Overview
Integrity Pro Series Water Store Skid
Integrity Pro Series Water Store Skid
- 2600/5200/7800
- Product Flow Rates
- 2600 - 1.81 USGPM
- 5200 - 3.62 USGPM
- 7800 - 5.42 USGPM
- Design Parameters
- Configuration: Multistage, single pass
- Inlet Pressure: 20 PSI
- Feed Water Temperature: 5 C (41F)
- Feed Water Source: Well water, or Municipal supply
- Pre-filtration Requirements: 5 micron nominal
- Feed Water Fouling Index: Silt Density Index (SDI) < 5
- Permeate Recovery Ratio: 50%
- Product Pressure Available: 25 PSI nominal
- Membrane Salt Rejection: 98% nominal(Based on 2000-
ppm MgSo4 solution at 100 psi, 77 degrees F)
General Specifications
- Frame
- Materials: Full depth welded structural carbon steel
- Paint: Epoxy coated
- Color: Blue
- De-Chlorination
- Control Valve: Autotrol series 263 Automatic Filter Valve
- Media Type: High capacity granular activated carbon
- Media Quantity: 2.0 Cubic Feet
- Filter Connections: 1” Autotrol adapters w/bypass valve
- Drain Connection: 3/4” outlet w/one way check valve
- Water Softening
- Control Valve: Autotrol Ready Soft Dual Alternating
- Demand Regeneration Softener Valve
- Media Type: High capacity ion exchange resin
- Media Quantity: 2.0 Cubic Feet
- Filter Connections: 1” Autotrol adapters w/bypass valve
- Brine Tank: 40 Gal Poly brine tank w/overflow protection
- Drain Connection: 3/4” outlet w/one way check valve
- Pre-Filters
- Housings Manufacturer: US Filter – Plymouth Products
- Model: #20 Big White
- Element #1: Wound Depth Filter, 20 micron nominal
- Element #2: Wound Depth Filter, 5 micron nominal
- Process Pump
- Manufacturer: Goulds
- Model: 10GBS15 or equivalent
- Materials
- Pump body/internals: 304 stainless steel
- Shaft and coupling: 304 stainless steel
- Connection type: submersible pump in stainless steel sleeve
- Capacity: 10GBS15 – 7.5 USGPM at 440 feet TDH
- Process Pump Motor
- Type: High efficiency
- Voltage: 230V
- RPM at 60 Hz: 3500 RPM
- Horsepower: 10GBS15 – 1-1/2
- Membranes
- Manufacturer: Osmonics
- Model: AK4040F400
- Materials: Thin Film Composite (TFC)
- Type: Spiral wound
- Pressure Vessels
- Manufacturer: Excel Flow
- Model: EF4040
- Materials: Stainless steel
- Rating: 400 psi working pressure
- Process Connections: End entry, feed/concentrate FNPT
| For Distribution System and Instrumentation Equipment Specifications please download brochure at top of page. |
 | |  | |  | |  | |  | |  | |  | |  |